How to Toggle Stair, Cycling, or Holding Function ON/OFF?
How to Toggle Stair, Cycling, or Holding Function ON/OFF?
Enable or disable functions like Stairs, Cycling and Holding function via the Settings tab under the User Preferences section.
Note: this function is only available from Intuy app v. 4.10.2 or higher.
Toggle button:
When a function is disabled, the button will be red and have "OFF" written on it, as shown below.
When a function is enabled, the button will be green and have "ON" written on it, as shown below.
Stair mode
Turn off stair mode
1.Open Settings tab.
2.Scroll to User Preferences.
3. Tap on Stairs toggle to switch off the function.
4. Stair function is off.
Why Stairs toggle is greyed out?
If a practitioner (e.g., CPO) disabled Stair Ascent in the Extra tab, the Stairs toggle will be greyed out.
After tapping on the toggle, a pop-up will appear.
A CPO can enable this in the Extra tab:
1. Check the "Enable stair ascent" box.
2. Tap the save button in the top right corner.
After this, the toggle button will be available again.
After the CPO has enabled the stair ascent, the toggle will be set to off.
User can now toggle the Stairs function on.
Holding mode
1. Tap on the Holding toggle to switch off the function.
2. Holding function is off.
Cycling mode
1. Tap on the Cycling toggle to switch off the function.
2. Cycling function is off.
In the Dashboard tab, the Cycling button will be greyed out and disabled.
If you tap the Cycling button, there will be a popup.
Det er så langt ingen kommentarer.
to be the first to leave a comment.