首页 └[PUB] Use of Intuy Knee └Intuy Modes

[PUB] Use of Intuy Knee

0 %

已完成

课程内容

Intuy Modes

Prev Next
Fullscreen ​ Share

What is Intuy Modes?

Intuy Modes is a feature only available on Intuy Knee PRO.

Intuy Modes allow the user to perform activities such as squatting, leisure snow sports, and a self-programmed activity. 

The self-programmed activity (Custom) can be configured and changed by the user for their own need.

WARNING:

  • Intuy Knee is made for daily use. High intensity sports must be avoided. 
  • Active sports such as snowboarding or skiing have a risk of injury.
  • Low temperature can affect the battery life, the functions, and capability of the Intuy Knee. Consult the IFU regarding the allowed Temperature. Long-term low-temperature exposure should be avoided.
  • Intuy Knee is not waterproof, sufficient protection against snow or water is necessary for Intuy Knee to be functional.
  • Prosthetic socket and components must be checked to ensure secure connection to prevent potential injury.
  • Test the Intuy Modes on level ground, and feel the resistance provided by the knee and range of motion before going on to the snow or ice.


Intuy Modes are available only on Intuy Knee PRO devices. 

Learn more about software packs available per product here. 

Display Intuy Modes on the Dashboard

Intuy Modes will be displayed on your Dashboard, when activated via the App Settings.

1. Open Menu and tap App Settings
2. Toggle on Intuy Modes
3. Intuy Modes are displayed on Dashboard tab.

Turn Intuy Modes ON/OFF, Configure Custom Intuy Modes


1. Switch on Intuy Mode ​

To switch on Intuy Mode, please follow these steps. 

1. Open the Dashboard tab.
2. Tap one of the activity icons for the desired activity.
3. Read the pop-up message and press proceed.
4. Intuy Mode is now active, indicated with 3 beeps.

Note: Intuy Knee will move to the target angle set in the Configuration page. 

2. Switch off Intuy Mode ​

There are two routes to switching off Intuy Mode via the Intuy App or using a predefined posture.

2.1. Switch off Intuy Mode via Intuy App​ 

To switch off Intuy Mode manually via the Intuy App, follow these steps.

1. Open the Dashboard tab.
2.  Tap the Start button.
3. Read the pop-up message and press proceed.


Note: The knee will emit 3 ascending beeps and vibrate.

4.  Intuy Mode is now turned off and the knee is in Start mode.

2.2. Switch off Intuy Mode using a predefined Posture

To switch off Intuy Mode using a predefined posture, follow these steps:

1. While standing, extend the hip and point the leg backwards.

Note: Do so without loading the knee.

2.  The knee will emit 3 ascending beeps and a vibration.


3.Intuy Mode is now turned off and the knee is in Start mode.

This same movement allows the user to switch between Intuy Mode and Start mode.  After switching off the Intuy Mode using the predefined posture, user can re-enter the last Intuy Mode by performing the same movement, pointing the leg backwards. 
Note: If the user stays out of the Intuy mode for more than 30min, it will not be possible to re-enter the Intuy Mode using the predefined posture anymore. The user must re-enter the Intuy Mode from the app.


3. Customize Settings ​

It is possible to customize Intuy Modes settings for skiing, snowboarding, skating, and the custom activities. Settings that you can adjust are target angle, flexion limit, extension limit, flexion resistance, and extension resistance. 

3.1. Parameters and Their Explanation 

Extension limit: Maximum allowed extension angle; beyond this angle, the knee will be difficult to extend.

Target Angle: Spring return angle; this is the angle the knee will return to when you stop applying force to the knee.

Flexion limit: Maximum allowed flexion angle; beyond this angle, the knee will be difficult to bend.

Flexion resistance: Resistance in the flexion direction, the lower the easier to flex.

Extension resistance: Resistance in the extension direction, the lower the easier to extend.

3.2. Adjust Parameters

To adjust the parameters, please follow these steps: 

  1.  Via Dashboard tab, tap the configure button. 
  2. In the Configure page use the sliders to adjust the settings. We suggest you start with: 
    1. Target Angle
    2. Flexion Resistance
    3. Extension Resistance
  4. Save the settings by tapping the save button in top right. 

Using the Intuy Mode

How to ski, snowboard, or skate is out of the scope of this tutorial. Intuy Modes are made to emulate the behavior of the human counterpart as much as possible. It is important that the user learns skiing, snowboarding, or skating from a professional trainer.


额定值
0 0

目前没有任何评论。

加入这个课程
成为第一个发表评论的人。