Rehab Modes

Rehab Modes allow users to rehabilitate in a progressive manner. The modes are configured and set by the practitioners, e.g. physiotherapist or a CPO. The modes include 

1. Ready: minimal functions, maximal stability. The user can stand up, sit down, and train stability, get used to the socket and pressure in the stump.
2. Set: transition to walking. Suitable for restricted outdoor walker (K2). The user can flex the knee, feel the resistance, and walk with an active swing.
3. Go: ready to take the challenges. Suitable for unrestricted outdoor walker (K3). The user can walk on different terrains, e.g., ramps, stairs. Additionally, the user can hold and lock the knee (squat) in place.
4. Custom: the practitioner can toggle on/off individual functions for tailored rehabilitation experiences.

Note: Rehab Modes feature is introduced after app version 5.0.0 and knee firmware version 3.0.0. 

The Rehab Modes feature and app interface can be enabled and disabled by following the steps below.

A practitioner can switch between different Rehab Modes by simply clicking one of the 4 buttons, Ready, Set, Go, and Custom. When switching, there will be a pop up on the app, warning about a risk. Make sure that the user is aware of this mode switching and the user is in a stable posture.

Practitioners can personalize a mode for the user via the Custom mode. 

Please note, a few functions are coupled and cannot be toggled individually. For example, 

• When deactivating Swing function, Stairs and Cycling are deactivated. 
• When deactivating Yielding, Holding and Kneeling functions are deactivated.

Practitioners can adjust Rehab Modes, while users see the result of the adjustment on their dashboard. Users cannot switch between Rehab Modes. However users can get out of Rehab Modes by clicking one of the other buttons, e.g., "START".