[PUB] Use of Intuy Knee

0 %

Contenido del curso

Setup Tab

Setup is a tab available on the Intuy App, merging the existing Settings, Extra tabs, and more together. Setup streamlines the device setup procedure, offers more tools for professionals, and organizes the layout in a more approachable way for all users. This change in the UI is available from the 5.3.0 Intuy App release.

Learn more about how to update the Intuy App here: link.

Within the Setup tab there are six accordions (sections) for CPOs:

Alignment;
User Data;
Calibration;
Options;
Extra parameters:
Advanced.

User Setup tab has four sections:

User Data;
Calibration;
Options;
Advanced.

Advanced sections are only available for Intuy Knee PRO devices.

Saving changes when navigating to a different section:

When switching from User Data and Extra Parameters to a different accordion/tab, if a parameter is changed, a pop-up message will appear prompting to save the changes:

Save: Changes will be saved to the device, and it will navigate to the different accordion/tab.
Discard: Changes will be discarded, and it will navigate to the different accordion/tab.
Cancel: Navigating to a different accordion is cancelled, and changes are not saved.

Explanation of the Accordions

The alignment accordion has a collection of tools that give active feedback and support during the alignment phase of device setup:

Bench alignment;
Static Alignment.

Learn how to use the tools here.

Note: The Intuy App Alignment tools are for indication and do not replace instructions listed in Instructions for Use.

The section of the Setup page collects all necessary data from the user, such as:

amputation side;
weight;
height;
knee axis height;
thigh length;
shoe size;
activity level - previously listed under Extra page.

Learn how to change measurement units here.

Calibration Accordion has two buttons:

Force Sensor
Standing Position

Learn more on how to perform the calibration and when here: link

The options section consists of a selection of features that can be activated and deactivated based on user’s preferences. This section previously was called User Preferences and was in the Settings tab.

For all models of Intuy Knees, these features can be activated/deactivated:

Cycling
Holding
Stairs
Wheelchair

For Intuy Knee RISE and Intuy Knee PRO, more features can be activated/deactivated:

Power Saving
E-Descent
E-Gait
E-Stairs

Learn more about E-Features here.

The extra parameters section is a collection of more advanced settings to further personalize a user's experience. In older versions of the app, these settings were listed under the Extra tab:

Walking:
- Extension speed;
- Force sensor sensitivity;
- Flexion amplitude;
- Pre-flex angle.
Standing:
- Stance resistance;
- Sit-to-stand power level.
Stairs and Ramp:
- Stair ascent power level;
- Stair ascent sensitivity;
- Descent resistance level.

For further details on what the parameters adjust, tap the information icon next to the parameter.

Stair ascent sensitivity – previously a check box, now a scale. In order to deactivate stair mode, change the number to 0, or use the Options accordion to turn it off.